Installation of SAF™ Treatment Trailer for the Food Processing Industry
(Click image to enlarge)
At Heron Innovators, our experienced team of engineers and technicians provided a fully integrated Suspended Air Flotation (SAF™) system installation for a meat processing facility. For this project, the customer required a system to remove suspended solids, fats, oil and greases from wastewater. Our trailer-mounted Model SAF125 treatment system installation delivered a comprehensive solution.
The trailer-mounted system was constructed from AISI type 304 stainless steel, PVC, and polyurethane, and measured 40 ft. long x 8 ft. wide x 12 ft. high. The system is capable of flow rates to 250 gpm with a 7.5 HP feed pump. This versatile and cost-effective system is designed to use less space than most treatment systems. In addition, it also uses a minimal amount of air to float separate suspended solids, with a 0.5% air to solid ratio. During development, in-process bench testing was used to prove the concept. Heron executed a process warranty which allowed the end user to purchase the pilot test trailer as their permanent treatment solution. This trailer was delivered from stock with a six-day turnaround time which allowed the customer to put the system immediately into use.
To learn more about this project or the processes used to develop and build it, see the table below or contact us directly.
Request for Quote
Food Processing Treatment Trailer Project Highlights
- Product Name
- Trailer mounted Model SAF125 Suspended Air® Flotation (SAF™) Treatment System
- Product Description
- Trailer-mounted Model SAF125 Suspended Air® Flotation Treatment System. Capable of treating 250 gpm. Contained and fully integrated are:
- 250 gpm feed pump,
- 4 in. magnetic flow meter
- pH Control System with PID loops for acid and caustic feed
- Controlled outlets for coagulant feed and a polymer dosing/flash mixing/aging system to promote flocculation
- Flotation of suspended solids and associated BOD/COD
- Skimmed solids pump,
- Fully automated continuous operation including starting/stopping system by remote signal/parameter.
- System Capabilities and Services Provided
- Engineering design of process and components
In-house fabrication of mechanical and electrical equipment
Custom fabricated welded stainless steel tanks and components.
Laboratory services supporting treatability study and proof of concept determinations.
Installation and start-up support
Operations and maintenance manual
- Overall Part Dimensions
- Length: 40 ft. L x 8 ft. W x 12 ft. H
- Tightest Tolerances
- ± 1/16 inch
- Material Used
- 304 stainless steel, PVC, Polyurethane
- Special Features
- Sold pilot trailer (250 gpm portable treatment system) as a complete packaged permanent treatment system. Customer enclosed the trailer and began using it immediately.
- Additional Facts
- System Feed Pump: 7.5 HP, 250 gpm
- 4 in. magnetic flow meter
- pH Control System with acid and caustic PID Loops
- Conditioning Tank: 304 SS, 1,800 gallons, 2-compartment with 2-turbine agitators
- Flotation Tank: Model CF-125 ClearFloater™ Cross-Flow Flotation Cell with flocculation agitator, chain and flight skimmer, solids hopper, adjustable stainless steel weir, and observation decking
- SAF™ Generator: Model F50 (13.6 gpm froth flow rating)
- Polymer dilution and aging system
- Acid, caustic, polymer, and frothing agent metering pumps
- Float solids transfer pump
- In process testing/inspection performed
- Bench Testing for TSS, COD/BOD, FOG removal efficiency
Pilot Trailer operation to demonstrate system capability
- Effective pretreatment, 1-day startup. In service since 2009.
- Industry for Use
- Food Processing
- Delivery/Turnaround Time
- 6 days (delivered from stock)
- Delivery Location
- Buffalo, New York
- Standards Met
- Customer Specifications, 2D CAD Drawing
View Other Industrial Applications
Back to Top